List of inert materials used in the gas block production process:

Cement M450-500D0 (without additives)
Quartz sand (seeded)
Aluminum powder (material porosity)
Water at a certain temperature
Polypropylene Fiber Fiber (to improve the strength of aerated blocks)
Other additives to improve the quality characteristics of aerated concrete blocks

The following types of adhesives are used for laying gas blocks:

Ordinary adhesive — similar in characteristics to tile adhesive, resistant to moisture, but without cold resistance additives. Used for interior work, for interior partitions; Recommended temperature: +5+35 degrees
Frost-resistant adhesive — for interior and exterior work. Recommended temperature range from -35 to +35

The recommended thickness of the adhesive layer is 1-4mm, the thinner the thickness, the smaller the cold bridges. With this thickness, consumption is 1 bag (25 kilograms) per 1 m3 (cubic meter). We recommend taking with a margin of 10-15%.

1 m3 (cubic meter) in aerated blocks:

600x300x100 — 55.6 pcs
600x300x200 — 27.8 pcs

The main difference is the method of pore formation (pore formation).

Foam block — in production, the foaming agents are usually synthetic; the foaming process occurs already at the mixing stage; as a rule, they are poured into ready-made molds of the required size. For example: 600x300x200
Gas block — exclusively natural inert materials are used in production, without synthetic additives. A single mass is poured, which foams within an hour, then after hardening, it is cut into the required sizes. The deviation in geometry is much higher in handicraft production; in most cases, manual cutting is used. At our Almaty plant, gas blocks are cut automatically and cut by computer.

The cost depends on the quantity and unloading method. Prices are within the city limits.

2500-5000 tenge Small batches of 0.5 cubic meters (1-40 pieces 600x300x100) — Yandex small size. Manual loading and unloading.
5000-11000 tenge. Medium lots of 1-3 cubic meters (40-200 pieces 600x300x100) — Yandex medium and large size, Our partners have the same prices, but the advantages are: the gas block is transported on pallets, the pallets are taken back, no deposit is required for the pallets, they don’t take money for waiting for loading and unloading, strictly agreed upon cost. Manual unloading.
12000-50000 tenge. Large batches — 6-12 cubic meters (240-650 pieces 600x300x100) — The manipulator unloads the pallets with a crane. A deposit is required for pallets.

For delivery you pay the drivers upon delivery, the plant does not have a commission from the drivers, we can give you a number, you can negotiate it yourself.

• Available. It’s even more convenient for us;
  The plant is located in Burundai (Boralday), Chapaeva Street 39/2, on the territory of a former bus depot;
  A hangar with a blue roof, to the right of the fuel tankers and excavator.
  Dial in 2gis «EkoBlokStroy» — a branch in Boraldai, in the city on Zheltoksan 1B there is only an office where you can pay in cash.

• We work on 100% prepayment:

  For your own confidence, you can come to our factory, make sure of the quality of the gas block, leave the payment in cash, or request an invoice to Kaspi, or simply by transfer to Kaspi.
  We issue an invoice remotely to Kaspi, or accept it by transfer. We issue a fiscal receipt and issue it through an online cash register.
  You pay directly to the drivers for delivery.

• We give you pallets on bail — 2500 tenge per 1 pallet. If you return the pallets to the base, we will return your deposit.

  We’ve been burned several times by free pallets, so now we’re only on bail.

  Let us know in advance how you will bring them to us.

  Factory address: Boraldai village (Burunday), Chapaeva street 39/2, inside the former bus depot.

• Types of special anchors for aerated blocks:

Two ways to calculate a gas block:

Our manager can help you with this; we will need data from you: length of walls, height of ceilings, sizes and number of windows and doors. If you know the square footage of the walls, then you can multiply it by 5.55 (the number of gas blocks per square meter)
You yourself can find an online calculator by entering the phrase in a search engine “online calculator for calculating a gas block”, enter all the data and get the result.

We sell in installments — through Kaspi Red / Kaspi Credit + 8% to the cost of the gas block.

We issue an invoice, pay through the app, pay in installments.